Accufast Et Tabber

  1. Accufast Et Tabber For Sale
  2. Accufast Et Tabber Manual
  3. Accufast Et Tabber Help

Looking to add, upgrade or replace your tabbing solution? Symco Group is an authorized reseller for Asmarc Accufast for their complete line of Addressing Printers, Tabbers, Labelers, Affixers and more. Contact Symco Group today ([email protected] or 800-878-8002) to purchase your next tabbing solution.

Accufast Et Tabber

. applies 1 tab per piece. tabs 15,000 pieces per hour. tabs pieces 5” to 12” wide, from 20 lb. Thin to 1/4” thick, coated and uncoated. runs a variety of 1 and 1.5 inch tabs: paper & clear, circles & rectangles, on rolls with or without tractor holes. built-in waste take-up spool 5,000 one inch and 4,000 1.5 inch tabs per. The Freehand tabber is a perfect machine if you are only tabbing a few mailers and need a machine to get it done quickly. Accufast Slim Jim System: The Slim Jim system is the combination of the of the KT 1.5″ tabber running inline with the Accufast ET. The greatest variety of equipment comes in the tabber category. From a simple stand alone unit to 'K' series modules and inline systems, ACCUFAST has the tabbing market covered. The ACCUFAST ET is a tabbing machine that has more uses than we have space to explain them.

Asmarc Accufast manufacturers several models to fit all your needs.

Accufast ET:

Tabs both booklets and self mailers in the correct spots automatically. Very little setup or operator interaction is required. Select the correct tab mode, load the proper tabs and feed pieces from whatever device you choose on the front end. When full, just clean out the waste and splice on another strip of tabs and go.

Accufast KT:

Table top tabber that applies either a 1″ or 1.5″ tab at speeds of 15,000 per hour. The KT is a crash tabber module and must be used with a feeder. The KT is the entry level for a professional level tabbing solution. By combining the KT with an FX feeder and CS3 output conveyor it creates a robust tabbing solution for your business needs.

Accufast KT2:

The KT2 is the “big brother” to the KT. The KT2 takes care of twin tab requirements on thin forms in a single pass. Each tabbing head works independently of the other as they apply tabs to the leading edge of the pieces moving through the machine.

Accufast Freehand Tabber:

Simple unit with a built in feeder. The Freehand Tabber uses crash tab technology in which a tab is ejected in front of the piece and the piece crashes into it carrying the tab and the piece between a set of rollers where the tab is folded and sealed. The Freehand tabber is a perfect machine if you are only tabbing a few mailers and need a machine to get it done quickly.

Accufast Slim Jim System:

The Slim Jim system is the combination of the of the KT 1.5″ tabber running inline with the Accufast ET. The Accufast Slim Jim allows you to get the extra tab on a side at right angles to the initial side as it runs the piece through the ET and into the KT.

Accufast LDM:

Until now rolled tabs were available on either small (5-10,000) or large (40,000) tabs per roll. The small rolls were always running out and the large rolls were hard to handle. Either way, production suffered. The ACCUFAST LDM handles rolls of at least 75,000 tabs and delivers the tabs to the tabber smoothly and automatically. The rolls are easy to handle and rolls may be spliced one to the other to avoid rethreading (another production killer). Tabs are wound on a spool which simplifies handling and increases the tab count per roll. An adapter kit allows he LDM to be set up to run pancake rolls of less than 12 inches in diameter. This allows a mailer to use up his supply of old tabs prior to switching to the ACCUFAST spooled tabs.

Essential Mailing Machine – Save Time with the Accufast KT Tabber

Get mail equipment that helps to round out your mail production sequence. If you’re using booklets or self-mailers for your business, you need an efficient way to seal all of those pieces.

NOTE!! At this time Accufast is no longer making this machine. Give us a call for pricing on a used machine or to discuss other options. A few are listed below.

Also see: Rena T-250, Rena T-750

Rely on Crash Tab Technology

With the Accufast KT Tabber, you can rely on crash technology to tab and seal documents faster. The open edge is fed in first, and the tabs “crash” into each document to seal it closed. There’s another “crash” with a sweep and roller system that folds the tab completely for a secure and accurate fit – no “drifting” tabs!

Apply one tab per piece at 1 inch or 1.5 inches per tab in a variety of different styles – circles, rectangles, on rolls, with tractor holes, without tractor holes, paper, translucent, clear – this tabber can do it all!

With the Accufast KT Tabber mail equipment, you’ll have a simple mailing machine that does exactly what it is supposed to. Unlike more complicated models, you’ll experience fewer problems and reduce the likelihood of future repairs with this streamlined tabber. There’s a short paper path to keep productivity high and skewing at a minimum.


This essential piece of mail equipment works well on its own, or can be placed inline with other products for more productivity.

Accufast KT – Essential Mailing Machine

The Accufast KT Tabber offers the following:

  • Efficiently applies up to 15,000 pieces per hour
  • Handles pieces 5” to 12” wide
  • Capable of running stock 20 lb. thin to 1/4” thick, coated and uncoated
  • Waste take-up spool built in
  • Runs rolls of 1″ 5,000 tabs per roll and 1.5″ 4,000 per roll

Accufast Et Tabber For Sale

Accufast KT Mail Equipment Technical Specifications

Accufast Et Tabber
  • Weighs 47 pounds
  • Dimensions 10”l x 17”h x 21”w
  • Runs on 115 volts 2 amps 60 hz or 230 volts 1 amp 50 hz
  • Place it inline a number of different tabletop printers, feeders and labelers including the Accufast TT for 2 tabs per pass, or ET Tabber for 3 tabbed sides in 1 pass.

Accufast KT tabber inline with the FX Feeder and 3FV conveyor

Accufast Et Tabber Manual

Similar Posts:

Accufast Et Tabber Help

  • SALE on Postal Tabber – Wafer Sealers Posted June 13, 2016
  • Video: Replacing the tab sweep on the Accufast KT Tabber Posted November 27, 2017
  • This Month, The New Rena AS-150 & More – January 2016 Newsletter Posted January 19, 2016
  • Accufast KT1.5 Dual Mode Tabber for 1.5 inch tabs! Posted July 27, 2009
  • The T-650 Multi-Side / Multi-Tabber, Be USPS Compliant Without Doubling Time & Cost to Produce! Posted January 24, 2010